Setting Up Your Scanner; Using The Scroll Control; Knob; Adjusting The Volume - Uniden UBC126AT Owner's Manual

setting uP your scanner

When you turn on your scanner for the first time, you can set
your screen display preferences as well as other elements such
as squelch levels, volumes, brightness, etc.
Using the SCROll CONTROl Knob
Turn the SCROll CONTROl knob on top of the UBC126AT to:
• Select channels
• Adjust volume
• Adjust squelch
• Set display settings
• Selects characters for text tagging
• Scroll up or down through menu options
• Change channels/frequencies in Hold mode
• Resume scanning
Press the SCROll CONTROl knob to select a setting.
Note: Pressing SCROll CONTROl is the same as pressing Pgm/E
on the keypad in Menu mode.

Adjusting the Volume

Press SCROll CONTROl; The volume level indicator and
1.
battery voltage display.
Turn SCROll CONTROl to adjust the volume level from 0
2.
to 15.
Press SCROll CONTROl to set the volume.
3.
To exit Volume Level mode, press SCROll CONTROl
4.
again or wait 10 seconds to return to the previous mode.
29