Programming Channels - Uniden UBC126AT Owner's Manual

PrograMMing cHannels

Now that you have configured your scanner, you are ready
to start using your scanner's preprogrammed service banks,
the custom search banks, the Close Call feature. You can also
program your channel memories or re-program your 10 custom
search bank memories.
Before the scanner can begin scanning, you must program a
frequency into at least one channel.
To select a channel, press Hold then enter the channel
1.
number (1-500).
Press Pgm/E to enter the Channel menu. (You can also
2.
press Hold and scroll to the channel; press Func then
Pgm/E.)
Note 1: Turning SCROll CONTROl in Function mode will
allow you to select the first channel in each bank.
Note 2: You can quickly store frequencies in Scan Hold mode
by entering the frequency and pressing Pgm/E.
Scroll to highlight Enter Frequency and press Pgm/E. You
3.
will see the channel number and currently programmed
frequency. (To return to the previous screen, press . Clr.)
Use number keys and . Clr for a decimal to enter the
4.
frequency. If you make a mistake, press . Clr to clear the
display. Press Pgm/E to store the frequency and return to
the Channel menu.
Press . Clr to return to the last screen.
5.
34