Search Options - Uniden UBC126AT Owner's Manual

If you want to change the search direction or if it is a long
transmission and you want to continue searching, turn SCROll
CONTROl or press Srch/Svc.
Quick Search Receive/Hold Modes
To hold on a frequency press Hold. To step through the
frequencies, turn SCROll CONTROl in Hold mode. Press Hold
to resume.
While monitoring a transmission, the upper line displays Quick
Search and the lower line displays the current frequency and
the direction indicator (↑or ↓).
The modulation, Priority mode icon (if Priority is enabled), any
CTCSS/DCS received (if enabled), and the Close Call icon (if CC
Pri or CC-DND is enabled) will also appear in the display.
• To store a frequency, press Pgm/E. See Storing Found Search
Frequencies, page 51.
• To temporarily lock out a frequency, press l/O.
• To permanently lock out a frequency, press l/O twice
quickly.
• To exit Quick Search, press Scan.
See also Search Options on page 49 for Delay, CTCSS/DCS
settings, Pager Screen and locking out/reviewing/unlocking
frequencies.

Search Options

Search Delay
This setting controls how many seconds the scanner waits after
a transmission ends before resuming searching. If you select a
minus delay time, the scanner stops on the transmission for the
49