Turning On The Scanner - Uniden UBC126AT Owner's Manual

key/ Press to . . .
icon
Pgm/E
• Select input data or a menu
• Access a channel through its
4/<
• Enter 4.
• Scroll left in Edit Tag mode.
7/Beep
Enter 7.
Note: Turn SCROll CONTROl to scroll up and down through
menu selections.

turning on tHe scanner

Note: Make sure the scanner's antenna is connected before you
turn it on.
1. You can select the country mode (Australia or New
Zealand) when you turn on the scanner. When you press
and hold
and hold 1 for Australia or 2 for New Zealand. The opening
screen displays, followed by the copyright notice.
2. If the scanner is new or has been reset, the default mode is
Scan Hold with all banks enabled and Close Call Do-
Not-Disturb active. Otherwise, the scanner displays the last
mode the scanner was in before it was powered down.
26
item.
channel number.
for 1 second to turn on the scanner, also press
Press Func and
this key to . . .
• Enter Channel
Programming
menu.
• Quickly save
frequencies in
various modes.
NA
Toggle the Key-
beep setting.