Setting Ctcss/Dcs For A Channel - Uniden UBC126AT Owner's Manual

mistake, press . ClR to clear the last character. Press . ClR
twice to clear all characters. To cancel and exit, press l/O.
Press Pgm/E to save the tag and return to the Channel
5.
menu.

setting ctcss/dcs For a cHannel

You can store a CTCSS tone or DCS code, set the scanner to
search for tones/codes, have the scanner open squelch on any
tone/code, or have the squelch only open if no CTCSS/DCS is
detected for any channel. (Default = Off )
To select a channel, press Hold and then enter the channel
1.
number.
Press Pgm/E to enter the Channel menu. (You can also
2.
press HOlD and scroll to the channel; press Func then
Pgm/E.)
Scroll to select Set CTCSS/DCS and press Pgm/E.
3.
4. Scroll to select one of the following options:
• Off - the scanner ignores all tones and opens squelch on
any signal
• CTCSS - the scanner prompts the user for the
appropriate tone. Squelch will open for this channel only
if the tone matches.
• DCS - the scanner prompts the user for the appropriate
code. Squelch will open for this channel only if the code
matches.
• CTCSS/DCS Search - the scanner displays any tone/
code being used, but opens squelch on any signal.
36