Heat & Glo SL-550TR-E Owner's Manual page 32

Rear Vent - Horizontal Termination
No Elbows
Note: Use DVP Series
components only.
H MAX
1
SL-550TR-E 24 in.
SL-750TR-E 24 in.
SL-950TR-E 18 in.*
Figure 7.12
Rear Vent - Horizontal Termination
One 45º Elbow
For corner installation of models SL-550TR-E and SL-750TR-E ONLY
Note: Use DVP Series
components only.
Note: Do not use a 45º elbow
for SL-950TR-E. Use two 90º
elbows for corner installation on
SL-950TR-E.
Figure 7.13
32
610 mm
610 mm
457 mm
Heat & Glo • SL-550 / 750 / 950TR-E • 2118-900 Rev. AC • 3/15
CAUTION
*For SL-950TR-E ONLY:
H Maximum can be up to 24 inches ONLY if the Optional
1
Refractory Kit (BRICK-950-E) is NOT used.
H = 9 in. (229 mm) Maximum
1