Draytek Vigor2760 User Manual page 295

2. The following setting page will appear.
Available parameters are listed below:
Item
Enable
Name
Mail Title
Mail From
SMTP Server
Port
Authentication
E-mail to
Vigor2760 Series User's Guide
Description
Check the box to enable such profile.
Type a name for the mail alert profile.
Type a heading of the mail.
Type a mail address for receiving the mail from outside.
The IP address of the SMTP server.
Type a port number for the mail alert.
Check this box to activate this function while using e-mail
application.
User Name - Type the user name for authentication.
Password - Type the password for authentication.
Confirm Password – Type the password again for
confirmation.
Add the mail address for sending mails out. You can type
several mail addresses in this field. All of them will receive
the mail alert at the same time.
Name – Type a name of the receiver.
E-mail Receiver – Type the e-mail address of the receiver.
285