Audiovox DVD1627 Owner's Manual/Warranty Document page 93

LOCAL/DISTANT
Press and hold ST/LOC/TITLE button on the front panel or ST/TITLE button on the
remote control for several seconds to select between local and distant stations.
Local setting for reception of strong station, and a distant setting for reception of wea-
ker stations. This function is effect during AUTO SEEK operation.
AUTOMATIC MEMORY STORING & PROGRAM SCANNING
- Automatic memory storing
Press and hold AS/PS/STOP button on the front panel or on the remote control for
several seconds, the radio searches from the FM1 the initial frequency and checks
the signal strength until one cycle search is finished. And then the 6 strongest stati-
ons are stored into the corresponding preset number button.
- Program scanning
Press AS/PS/STOP button shortly to scan preset station.
STATION STORING
Press any one of the preset buttons (1 to 6) on the front panel to select a station,
which had been stored in the memory. Press this button for several seconds, current
station is stored into the number button.
MONO/STEREO
Press ST/LOC/TITLE button on the front panel or ST/TITLE button on the remote
control shortly to select mono or stereo mode. You can sometimes improve reception
of distant stations by selection mono operation.
RDS (RADIO DATA SYSTEM) OPERATION
- Setting RDS mode
Press AF button on the front panel or on the remote control and release immediate-
ly to switch on or off RDS mode.
Whenever RDS is switch on, symbol "AF" appears on the display.
Program name is displayed on receiving a RDS station.
"AF" starts blinking if the broadcasting signal getting worse.
"ALARM" will be displayed when an emergency broadcasting is received,
meanwhile sound output level will be adjusted to the preset output level automatical-
ly when the volume control is set at minimum.
93