Installation - Audiovox DVD1627 Owner's Manual/Warranty Document

INSTALLATION

Notes:
- Choose the mounting location where the unit will not interfere with the normal dri-
ving function of the driver.
- Before finally installing the unit, connect the wiring temporarily and make sure it is
all connected up properly and the unit and the system work properly.
- Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
- Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
- Install the unit where it does not get in the driver's way and cannot injure the pas-
senger if there is a sudden stop, like an emergency stop.
- If installation angel exceeds 30°from horizontal, the unit might not give its optimum
performance.
30
- Avoid installing the unit where it would be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater, or where it would be subject to dust,
dirt or excessive vibration.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either from "Front" (conventional DIN Front-mount)
or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes
at the sides of the unit chassis). For details, refer to the following illustrated installa-
tion methods.
75