Audiovox DVD1627 Owner's Manual/Warranty Document page 77

6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and
bend open the tabs located around the sleeve with a screwdriver. Not all tabs will
be able to make contact, so examine which ones will be most effective. Bending
open the appropriate tabs behind the dashboard to secure the sleeve in place.
Dashboard
Tabs
Screwdriver
Sleeve
7. Reconnect the wire harness and the antenna and be careful not to pinch any wires
or cables.
8. Slide the unit into the sleeve until it locks into place.
9. To further secure the unit, use the supplied metal strap to secure the back of the
unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to
attach one end of the strap to the mounting bolt on the back of the unit. If necessa-
ry, bend the metal strap to fit your vehicle's mounting area. Then use the supplied
hardware (Tapping Screw (5x25mm) and Plain Washer) to attach the other end of
metal strap to a solid metal part of the vehicle under the dashboard. This strap also
helps "installing the front panel").
Hex Nut
Spring Washer
Metal Strap
Mounting Bolt
Plain Washer
Tapping Screw
77