Epson TM-C3400 Technical Reference Manual page 40

Paper type
Form
Backing paper width
Label width
Label length
Gap between labels
Edge cutoff on left/right side
Label edge R
Black mark width
Black mark length
Black mark centering position
Black mark interval
Paper thickness
Roll paper core
External diameter
Winding direction
• Do not use the paper with a hole or cutout.
• when using this type of paper, the label end and the black mark end of the black mark
40
Synthetic Media Label
Roll paper
30 to 112 mm
25.4 to 108 mm
50.8 to 1117.6 mm
When it is less than 15 {0.59"} to 50.8 {2"} mm, use the label of
"When removing right and left fringes only" in the illustration.
3 to 5 mm
2 ± 0.5 mm
2 mm or less
13 mm or more
9 mm or more
8.5 ± 1 mm
15 mm or more
0.195 mm
Outside diameter: 44.1 mm
Maximum 101.6 mm
Printing face must be facing outside.
position on the die-cut label must be matched.