Print without Missing Dots
The printer has an auto nozzle checking system that detects missing dots, and performs the auto
head cleaning if any dots are missing. Select from 4 modes that are available for different levels
of requirements for print quality and movement.
Sets this function from [Missing Dot Operation] on [Maintenance And Utilities] of the
printer driver.
• High Reliability Mode (Void Image Print)
Missing dots check is performed after printing each page to check that dot missing has not
occurred. When dot missing is detected, the Void Image Print is performed at the bottom of
the previous page. And after the dot missing is resolved by the auto head cleaning, reprinting
starts from the corresponding page.
The Void Image is printed in solid black by default; however, other image files can also be
registered. Since dots are missing for the page on which the Void Image is printed, take proper
action such as discarding it.
• High Reliability Mode (Reprint)
Missing dots check is performed after printing each page to check that dot missing has not
occurred. When dot missing is detected, the following screen of the EPSON Status Monitor 3 is
displayed. Select the next operation from [Restart printing] (printing the next data) and
[Reprint] (reprinting after dot missing is resolved by the auto head cleaning.)
• Anti-missing Read Mode
Does not perform missing dots check after printing each page, but checks missing dots while
not printing.
Chapter 1 Product Overview
23
1