Ordering Spare Parts; Storing The Machine - Stihl 9 Instruction Manual

Ordering Spare Parts

Please enter your saw model, machine
number as well as the part numbers of
the guide bar, saw chain and chain
sprocket in the spaces provided on the
right
This will make re-ordering simpler.
The guide bar, saw chain and chain
sprocket are subject to normal wear and
tear.
The part numbers of the standard bar,
chain and sprocket are printed on the
right for your convenience.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
Model
Machine number
Guide bar part number
Chain part number
Sprocket part number
For recommended STIHL reduced
kickback cutting attachments see sec-
tion "Specifications" of this Owner's
Manual.
48
Warranty claims following repairs
can be accepted only if the repair has
been performed by an authorized STIHL
Service Shop using original STIHL spare
parts.
Original STIHL parts can be identified by
the STIHL part number, the T
logo and the STIHL parts symbol
The symbol may appear alone
on small parts.

Storing the Machine

For periods of about 3 months or longer:
•
Drain and clean the fuel tank in a
well ventilated area.
•
Run engine until carburetor is dry -
this helps prevent the carburetor
diaphragms sticking together.
•
Remove the saw chain and guide
bar, clean them and protect
with corrosion inhibiting oil.
•
Thoroughly clean the machine -
pay special attention to the
cylinder fins and air filter.
•
If you use a biological chain and
bar lubricant, e.g. STIHL Bioplus,
completely fill the chain oil tank.
•
Store the machine in a dry and high
or locked location - out of the
reach of children and other
unauthorized persons.