Definitions - Stihl 9 Instruction Manual

'HILQLWLRQV
 6SDUN 3OXJ %RRW
Connects the spark plug with the
ignition wire.
 &KDLQ %UDNH
A device to stop the rotation of the
chain if activated in a kickback
situation by the operator's hand or
by inertia.
 2LORPDWLF 6DZ &KDLQ
A loop consisting of cutters,
tie straps and drive links.
 *XLGH %DU
Supports and guides the saw chain.
 &KDLQ 7HQVLRQHU
Permits precise adjustment of chain
tension.
 &KDLQ &DWFKHU
Helps to reduce the risk of operator
contact by a chain when it breaks
or comes off the bar.
 &KDLQ 6SURFNHW
The toothed wheel that drives the
saw chain.
 &KDLQ 6SURFNHW &RYHU
Covers the clutch and the sprocket.
 %XPSHU 6SLNH
Toothed stop for holding saw steady
against wood.
 0XIIOHU
Reduces engine exhaust noise and
directs the exhaust gases.
 &KRNH FRQWURO
A control used when starting cold
engine.
 5HDU +DQG *XDUG
Gives added protection to
operator's right hand.
 6WDUWHU *ULS
The grip of the starter, for starting
the engine.
 2LO )LOOHU &DS
For closing the oil tank.
 )XHO )LOOHU &DS
For closing the fuel tank.
 6WDUWLQJ 7KURWWOH /RFN
Keeps the throttle partually open
during starting.
 7KURWWOH 7ULJJHU ,QWHUORFN
Must be depressed before the
throttle trigger can be activated.
 7KURWWOH 7ULJJHU
Controls the speed of the engine.
  6WRS 6ZLWFK
Switches the engine's ignition system
off and stops the engine.
 )URQW +DQGOH
Handle bar for the left hand at
front of saw.
 )URQW +DQG *XDUG
Provides protection against
projecting branches and helps
prevent the left hand from
touching the chain if it slips off
the handle bar.
 5HDU +DQGOH
The support handle for the right
hand, located at or toward the
rear of the saw.
*XLGH %DU 1RVH
The exposed end of the guide bar.
(not illustrated, see chapter
,,Tensioning the Saw Chain".)
&OXWFK
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed.
(not illustrated).