6WDUWLQJ
Chain brake engaged
Before starting your saw, make sure you have a firm foot-
hold and check that the saw chain is not touching the ground
or any other obstacles. Bystanders must be kept well clear
of the general work area of the saw.
6WDUWLQJ SURFHGXUH
Engage the chain brake by pushing the hand guard
1.
towards the bar nose.
Move stop switch away from I.
2.
If engine is cold, move choke slide to I. This also
3.
applies if the engine has been running but is still cold.
If engine is warm, move choke slide away from I.
Set throttle trigger to start position by pressing the
4.
safety throttle lock , throttle trigger and starting
throttle lock in that order. Then let go of throttle
trigger first and then the starting throttle lock .
Top:
Stop switch away from
Center:
Choke slide on
Bottom:
Starting throttle position
1
G
I
- cold start
2
3
6
5
4