Digital Mode; Analog Mode - Panasonic PT-52LCX65-K Operating Instructions Manual

Select Audio Mode for TV Viewing

Digital mode

Press SAP to select the next audio track (if
SAP
available) when receiving a digital channel.

Analog mode

Press SAP button to select the desired audio
SAP
mode as described below.
(Arrow shows selection.)
• Each press of SAP button will change the audio
mode as shown below.
• "SAP" is selected with first press of SAP button.
Receivable Broadcast Types
The following are possible broadcast types with their
accompanying on-screen displays. The signal being
received is indicated with red text while the se lect ed
audio mode is highlighted in yellow.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
lan guage) and Secondary Au dio Program (sub
lan guage) broad casts are both be ing received
si mul ta ne ous ly. Select the STEREO or SAP audio
mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Se lect STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for pos si bly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Audio track 1 of 1
(English)
Sleep Timer Feature
Switches the unit OFF in a preset amount of time from 0
to 90 minutes in 30 minute intervals.
SLEEP
STEREO
SAP
MONO
STEREO
SAP
MONO
Note:
• Pressing DISPLAY with sleep timer set displays remaining
time. This can also be done by pressing SLEEP. If you
continue to press SLEEP, the sleep time setting mode will be
entered.
• Sleep time may also be set from the Menu screen. (P. 44).
Press SLEEP repeatedly to select the
desired time.
• To cancel, press SLEEP repeatedly until 0
appears. Also, turning Power OFF while setting
SLEEP will reset to zero.
0
30
60
90
35