Panasonic PT-52LCX65-K Operating Instructions Manual page 21

RGB signals that can be input
The table below lists the different types of RGB signals that can be input.
If a signal which differs greatly from the types listed below is input, the picture may not be displayed
correctly, or a black background may be displayed. In this case, "signal" will flash on-screen for about 5
seconds.
Mode type
VGA400 (70 Hz)
VGA480 (60 Hz)
SVGA (60 Hz)
* XGA (60 Hz)
* Signal will be compressed to fit the display.
Notes:
• Input signals, other than those listed with a * mark, will give you a beautiful, stable picture.
• The D-SUB15P connector can accept RGB (H-V sync separate).
• When an external video processor/scaler is used, it must have RGB (H-V sync separate) output.
Signal data
No. of dots Horizontal frequency
(H × V) (kHz)
640 × 400 31.47
640 × 480 31.47
800 × 600 37.88
1 024 × 768 48.36
Information menu
Vertical frequency
display
(Hz)
70.08 VGA400
59.94 VGA
60.32 SVGA
60.00 XGA
21