Panasonic PT-52LCX65-K Operating Instructions Manual page 33

Using the CH/ VOL Button
Select desired channel:
Press CH or NUMBER keys.
Adjust to desired volume level:
Press VOL + or VOL -.
Notes:
• The channel number and volume level are stored even after
the unit is turned off.
• Power consumption can be reduced if the volume level is
lowered.
Channel and Program Tuning
Channel and Program tuning in digital television differs
from conventional television. With DTV, many programs
can exist within a single 6 MHz channel. These channels
behave as sub-channels within a single channel. When
tuning to a digital channel, the unit will also tune to a
program and will indicate the channel and program in the
on-screen Channel Banner display.
In order to select channels properly, Auto program must
be performed (P. 29).
Follow the procedure below to directly enter the channel
number using the NUMBER keys on the Remote
Control.
Select analog channel
1
Press the NUMBER keys on the
1 2 3
Remote Control to enter the Channel
4 5 6
number. Press OK.
7 8 9
The following is an example of tuning
0
to channel 15.
2 Direct Tuning Example
CH
Step
VOL VOL
OK
1
CH
2
3 Press OK
Note:
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Select digital channel
1
If tuning a digital channel and your
1 2 3
channel contains more than one
5 6
4
program, press PROG and enter
7 8 9
the program (1, 2, 3 etc.) using the
0
NUMBER keys. Press OK. The
following is an example of tuning to
2
PROG
channel 15-1.
Channel Banner
Action
Display
Press 1 1
Press 5 15
15
Direct Tuning Example
3
1 2 3
5 6 Step
4
7 8 9
1
0
2
3
4
4
CH
5 Press OK
VOL VOL
OK
CH
Note:
• If, during channel selection, no action is taken for several
seconds, the Channel Banner is exited and the currently input
channel is automatically selected.
Unit Status display
Press the Channel or RECALL button, except when
the MENU screen is dis played, to display current unit
status information.
Channel Banner: Minimized
Press CH
channel banner. It will display the
CH
channel number, and the station
VOL VOL
OK
identification (if available).
CH
Note:
• The Station identifier is not displayed when you use Split
Screen mode.
Channel Banner: Maximized
Press RECALL to maximize the
displayed channel banner.
Channel, Program and Station identifier
Program title
Andrew's cooking show
15-2
ABC - HD
CC SAP TV-G 1080i
Closed Caption Rating Picture mode
setting
SAP indication Signal resolution
Channel Banner
Action
Display
Press 1 1
Press 5 15
Press - 15-
Press 1 15-1
15-1
to minimize the displayed
Channel Number
15-2
ABC - HD
Station identifier
30
STANDARD 4 : 3
Time remaining
in Sleep Timer
Aspect
33