Panasonic PT-52LCX65-K Operating Instructions Manual page 14

Installation (continued)
CableCARD
TM
This module (also called Point of Deployment (POD) module or Digital Cable Module (DCM)) allows you to
tune digital and high definition cable channels through the cable antenna. Contact your local cable company
for information regarding the availability and costs of CableCARD
1
Connect the cable antenna to the VHF/UHF Cable input on the back of the unit.
2
Insert the CableCARD
In from cable
CableCARD
TM
Notes:
• A Digital Cable Subscription is required.
• Do not insert a PC card into the CableCARD
• Follow the instructions on screen.
If you experience keyboard or remote control function hang-up when using CableCARD
back in and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further
instructions.
14
Connection
(label side facing left) into the CableCARD
TM
INTERFACE.
TM
related services.
TM
INTERFACE on the back of the unit.
TM
, unplug the unit and plug it
TM