Saeco PHEDRA Manual page 42

English
Format of warning error description recorded in LOG:
Exx
WHAT ==> xx code error/warning alarm
aabb WHERE ==> if Myy = spiral motor yy
aabb WHERE ==> if Syy = yy instant product dispensing
aabb WHERE ==> if Lyy = yy instant product rinsing
aabb WHERE ==> if C — = coffee brewing
aabb WHERE ==> if aabb = hexadecimal codes
ddmmm WHEN ==> day in figures, month in string (3 letters)
hh:mm WHEN ==> hour:minutes
ii
error index in LOG
NN
number of errors in LOG
1.2.
Rinse cycles
...
automatic cycle starts, thus activating each instant product
circuit in sequence.
1.3.
Water filter
...
1.3.1.
Last filter change
...
1.3.2.
Remaining qty
...
regenerated. When this value is less than 1, a Warning
(W83) is recorded in the Error LOG.
1.3.3.
Filter reset
...
Qty" to the same value as "Filter Limit" and the date in the
"Last Filter Change" is changed to today's date.
42
Rinsing Cycles
Enables rinsing of the instant
product brewing circuits.
By pressing the ENTER key the
Water Filter
(Only if Complete Menus are
enabled) Allows the use of the
water filter to be checked.
LAST FILTER CHANGE
Date of the last filter reset.
REMAINING QTY
Number of litres of water
that can still be dispensed
before the filter needs to be
FILTER RESET
Select YES to indicate a new
filter has been installed. This
operation returns "Remaining
1.4.
Calibrations
...
1.4.1.
Cof. dosing unit
...
must:
- Remove the brew group
- Position a container under the dosing unit to collect the
coffee that will be ground.
- Select YES from the menu.
When you press the ENTER button, a coffee dose will be
ground and discharged by the dosing unit.
Check that the weight of the coffee dose is within the limits
for the brew group used (between 6 and 9 grams for Group
7 g, or between 7 and 11 grams for Group 9 g).
1.5.
Cool down boiler
...
COOLING " the VM dispenses water until the temperature
detected by the sensor placed on the boiler has fallen below
50°C.
A coloured bar on the display indicates the current
temperature of the boiler. When the bar disappears the
temperature detected is less than 50° and the cooling down
operation is completed; the VMC must be turned off.
1.6.
Drain boiler
...
1.7.
Boiler filling
...
is full (until water is dispensed from the coffee nozzle).
1.8.
Steam Cleaning
...
Cappuccinatore. To carry out this cycle, you need to have
the special cleaning solution (see paragraph 10.2.9 for
further information).
Calibrations
COF. DOSING UNIT
Allows you to check the coffee
dose in the dosing unit.
To perform the check, you
Boiler Cooling
Allows quick cooling of the
boiler.
By selecting the item " BOILER
Boiler emptying
It enables start-up of the
automatic discharge cycle of
the boiler.
Boiler Filling
Allows you to automatically fill
the coffee boiler with water.
Repeat the cycle until the boiler
Steam Cleaning
I t a l l o w s a c t i v a t i n g t h e
cleaning cycle of the milk
dispensing circuit through the