Saeco PHEDRA Manual page 36

English
2.4.11
Commit to vend
No
may be useful, for example, for changing banknotes into
coins. By setting "Y", the credit inserted can be returned as
change only after the sale has been completed. Default =
YES.
2.4.12
Banknote enabl.
...
2.4.12.1
Banknote 1/16
No
from accepting a specific banknote. Default = All enabled.
2.4.13.
Banknote escrow
No
(if supported); this function is supported by the banknote
reader. In this way, if the sale fails or the card system fails
to charge, the banknote will be returned. By setting "N", any
inserted banknote goes to the banknote reader's stacker, so
that the banknotes cannot be returned. Default = No.
2.4.14.
Slave address
0x40
slave connected vending machine. If the vending machine
is in Slave mode, it enables setting of its address. Possible
addresses are 0x40, 0x48 and 0x50. Default = 0x40.
36
COMMITTED TO VEND: By
setting "N", the credit inserted
can be returned even if no sale
has been made. This function
BANKNOTES ENABLING:
Enables selection of which
banknotes will be accepted by
the MDB banknote reader.
A specific banknote is enabled
for acceptance by setting "Y".
On the contrary, the "N" setting
prevents the banknote reader
B A N K N O T E E S C R O W :
By setting "Y", an inserted
banknote is stored in the escrow
position by the banknote reader
SLAVE ADDRESS: When the
vending machine is in Master
mode, this menu enables
setting of the address of any
2.5.
Max credit
2.55
machine. Once this limit has been reached, the payment
systems are disabled so that no more credit can be accepted.
Default = 20.00.
2.6.
Multivend
No
"N" (no), the residual credit will be collected by the vending
machine.
2.7.
Overpay time
180
collects the displayed residual credit. The time is adjustable
at intervals of 10 seconds. By setting "000" the function is
disabled.
2.8.
Fixed zeros
0
2.9.
Decimal digits
0
Max credit
This allows the user to set the
maximum credit which can
be accepted by the vending
Multivend
Enables the user to use any
residual credit to purchase
other beverages. By setting
Overpay Time
It establishes the maximum time
(expressed in seconds) beyond
which the vending machine
Fixed Zeros
Allows setting of the number of
fixed zeros for credit.
Decimal point posit.
Enables setting of the position
of the decimal point of the
credit.