Saeco PHEDRA Manual page 34

English
PAYMENT SYSTEMS
2.
Payment system
...
2.1.
Protocol
...
- EXECUTIVE protocol;
- PRICE HOLDING/DISP Protocol;
- BDV Protocol;
- MBD Protocol;
- NO PROTOCOL (no serial protocol);
- Master/Slave executive (the vending machine operates
as master for another vending machine);
- PHD Master /Slave (the vending machine operates as
master for another vending machine that works with the
PRICE HOLDING/DISP protocol);
- MDB SLAVE (the vending machine operates as slave to
another machine);
The "NO PROTOCOL" setting will be used when a payment
system operating with one of the protocols provided by the
other settings "EXECUTIVE", "PRICE HOLDING", "BDV",
"MDB" "MDB SLAVE" or "EXEC MASTER/SLAVE" is not
installed on the VM.
This setting is necessary since the VM continuously checks
for dialogue with the provided payment system. If the VM
detects no dialogue, it signals this fault on the display through
the message "NO LINK".
This signal cannot be considered an error condition.
2.2.
Parallel coiner
...
the cancelling machine and the choice of values to be
assigned to the single money channels.
Entry description:
2.2.1.
Enable
No
By setting "N", a parallel coiner which may be connected
to the vending machine is always disabled.
34
Th The entries of the PAYMENT
SY SYSTEMS are:
Protocol
Enables selection of the protocol
used by the vending machine
to dialogue with the payment
system installed on it:
Parallel coiner
A l l o w s e n a b l i n g o f t h e
parameters of the parallel
coiner, the mechanical coiner,
ENABLE: By setting "Y", the
parallel coiner, the mechanical
coiner and the cancelling
machine control are enabled.
2.2.2.
Coin values
...
2.2.2.1.
Moneta 1/6
0.00
Channel Payment system
1 Parallel coiner
2 Parallel coiner
3 Parallel coiner
4 Parallel coiner
5 Parallel coiner
6 Parallel coiner
7 Cancelling machine
2.3.
Banknote reader
...
assigned to single banknote channels.
Entry description:
2.3.1.
Enable
No
may be connected to the vending machine is always
disabled.
2.3.2.
Inhibition level
255
2.3.3.
Banknote values
...
2.3.3.1.
Banconota 1/4
0.00
COIN VALUE: Enables setting
of the value of the coins
transferred to the vending
machine from the parallel
coiner, the mechanical coiner
and the cancelling machine.
The following table shows
the channel/payment system
combinations.
Banknote Reader
It enables the parameters of
the parallel banknote validator
and the choice of values to be
ENABLE: By setting "Y", the
management of the parallel
reader is enabled. By setting
"N", a parallel reader which
INHIBITION LEVEL: Enables
setting of the active level of
the banknote reader inhibition
signal.
BANKNOTE VALUE: Enables
setting of the value of banknotes
transferred to the vending
machine from the parallel
reader.