Table of Contents
Advertisement
1
FIGURE 44
STEP 44
• To assemble the LEG CABLE (101) follow the cable routing as shown and use the following steps:
• SECURELY attach the LEG CABLE (101) to the LEG CURL/EXT (15) using one 3/8 X 1-1/4" BOLT (83), one 3/8" WASHER (91), and
one 3/8" LOCK NUT (92). See FIGURE 44.
• Route the LEG CABLE (101) around the pulleys in the BASE (1) and through the floating pulley as shown in FIGURE 44.
101
1/2
0
FLOATING
PULLEY
101
LAT CABLE
PRESS CABLE
1/2
1/2
1
2
15
FIGURE 45
STEP 45
• Run the LEG CABLE (101) through the
66
101
7
1/2
1/2
3
4
40
83 3/8 X
1-1/4"
101
91
92
hole of the D-RING (7) and attach one
KEYHOLE CLEVIS (66) to the end of
the LEG CABLE (101). See FIGURE 45.
1/2
5
6
Hide quick links:
Advertisement
Table of Contents
