Viper 60s Theory Of Operation And Maintenance Manual page 113

-
VIPER SCSI COMMANDS
5.19.9 Completion Status Continued
CODE
I
MESSAGE
I
DESCRIPTION
08h Blank Check • The Viper drive has encountered the
End of Data
OA Copy Aborted' The target detects an exception
condition; Check Condition Status is sent
to the managing Viper. The drive
generates a Check Condition Status for
the initiator that issued the command.
The Extended Sense Data returned by
the managing Viper drive has a Sense
Key set to COpy Abort, indicating a
target error. Includes Sense Data from
the target when available.
• The target terminates the command sent
from the Viper drive with a Check
Condition. If the target was the source,
byte 8 ot the Request Sense Extended
Sense is set to 06h, and byte 9 is set to
OOh. It the target was the destination,
byte 9 of the Request. Sense Extended
Sense is set to 05h, byte 8 is set to OOh.
Byte 14 of the Request Sense Extended
Sense contains the Status byte from
the target. Byte 15 to 22 contains bytes
a
to 7 of the target Request Sense
Extended Sense.
• A Selection Timeout occurred on the
remote device
• The Direct Access device utilized an
unsupported block size
40h EOT bit and
• Early Warning was encountered during
No Sense a WRITE to the drive.
• A WRITE to the Viper drive in the Early
Warning region was successfully
completed
43h EOM bit and • EOT was encountered during a WRITE
Media Error to the Viper drive
48h EOT bit and
• Logical EOT was encountered during a
Blank Check READ from the drive
5-55