Viper 60s Theory Of Operation And Maintenance Manual page 103

VIPER SCSI COMMANDS
5.18.3 Completion Status
COMPLETION
I
CODE MESSAGE
I
DESCRIPTION
OOh Good Status
•
The position of the Media is not changed
·
Viper drive is ready to accept any appropriate
command
·
Viper drive remains in any previously set mode
·
Viper drive accepts commands from any Initiator
02h Check Condition Extended Sense byte 02
...
CODEiMESSAGE
I
DESCRIPTION . .
04h Hardware Error • Parity error on either the
SCS I Bus or the Viper drive
OSh Illegal Request • The CDB contains an
invalid bit
OSh Unit Attention • The cartridge was changed
prior to accepting this
command
• The Viper drive was Reset
prior to accepting this
command
5-45