Maintenance Work On Chassis And Engine; Removal Of Seat (Sx, Sc); Removal Of Seat (Egs) - KTM 400 SX Owner's Handbook Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

ALL MAINTENANCE AND ADJUSTEMENT OPERATIONS THAT ARE MARKED WITH A * REQUIRE SPECIALIST
KNOWLEDGE. FOR YOUR OWN SECURITY, LET THESE TASKS BE CARRIED OUT BY A KTM-DEALER
!
– W
HEN CLEANING THE MOTORCYCLE
.
ELECTRIC CONNECTORS ETC
– W KTM,
HEN TRANSPORTING YOUR
OFF
FUEL TAP IS IN THE POSITION
– D
O NOT USE TOOTHED WASHERS OR SPRING RINGS WITH THE ENGINE FASTENING SCREWS
I , -
NSTEAD USE SELF LOCKING NUTS
– L
ET YOUR MOTORCYCLE COOL DOWN BEFORE BEGINNING ANY MAINTENANCE WORK IN ORDER TO AVOID GETTING BURNED
– R O , ,
EMOVE ILS FATTY MATTERS
– U
NDER NO CIRCUMSTANCES MAY USED OIL BE DISPOSED OF IN THE SEWAGE SYSTEM OR IN THE OPEN COUNTRYSIZE
1.000.000 .
LITERS WATER
2
3
4
WARNING
CAUTION
,
DO NOT USE A HIGH PRESSURE CLEANING UNIT IF POSSIBLE
ENSURE THAT IT IS HELD UPRIGHT WITH RESTRAINING STRAPS OR OTHER MECHANICAL FASTENING DEVICES AND THAT THE
-
IF THE MOTORCYCLE SHOULD FALL OVER
.
, ,
FILTERS FUELS WASHING DETERGENTS ETC

Removal of seat (SX, SC)

By using the quick-release fastener
tools. Turn the quick-release fastener about 180° counter clockwise and lift up
the rear of the seat. Pull the seat backwards and unhook it from the front fastener
1 screw
into the metal clasp
1

Removal of seat (EGS)

Remove the attachment screws
of the seat, pull backwards, and unhook it from the fastener screw
the seat, hook the seat into the attachment screw, set the rear portion down on
the frame, and slide it forward. If necessary, press down on the front area of the
seat so that the seat catches on the metal clasp
ment screws.
,
OTHERWISE WATER WILL PENETRATE THE BEARINGS
,
BE AWARE OF ANY LEAKING FUEL FROM THE CARBURETOR OR FUEL TANK
,
AS THESE WORK INTO THE FRAME PARTS AND KEEP WORKING LOOSE
. .
ORDERLY
1
2
. When installing the seat, be sure to insert the rear portion of the seat
3
.
4
from the underside of the fender. Lift the rear
!
,
CARBURETTOR
.
. 1
LITER USED OIL CONTAMINATES
, the seat can be removed without using
2
3
. Insert and tighten the attach-
,
.
15
. To install