Download Print this page

Important Notes; Tools Required For Assembly; Bolt Length Ruler - ParaBody 415101 Assembly Instructions Manual

Leg press adapter kit

Advertisement

]IMPORTANT NOTES[
There is a risk assumed by individuals who use this type of equipment. To minimize risk, please
follow these rules:
1. Consult your physician before beginning any exercise program.
2. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.
Failure to do so may result in serious injury.
3. Do not allow minors or children to play on or around this equipment.
4. Exercise with care to avoid injury.
5. If unsure of proper use of equipment, call your local Parabody distributor or call the
Parabody customer service department at (800) 328-9714.
Please note:
* Thank you for purchasing the Parabody 415101 Leg Press Adapter Kit. Please read these
instructions thoroughly and keep them fbr future reference. Tl~:is product must be assembled
on a flat, level surface to assure its proper function.
* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water. Touch-up paint can be purchased from your Parabody customer service representative
at (800) 328-9714.
[Tools Required for Assembly]
* Rubber mallet or hammer
* 3/4" wrench
* 9/16" wrench
* Ratchet with 3/4" and 9/16" sockets
* 5/32" Allen wrench
* Adjustable wrench
* Tape measure
[
Bolt Length Ruler
]
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH RULER:
BOLT LENGTH
5
6

Advertisement

loading

This manual is also suitable for:

400