Cleaning And Maintenance; General Notes For Correct Operation; Cleaning And Scheduled Maintenance - Saeco NEXTAGE CAP010 Use And Maintenance

English
10

CLEANING AND MAINTENANCE

Before performing any maintenance and/or cleaning
operations, turn off the appliance by switching the switches
to the "OFF" position. Disconnect the appliance from the
power supply by removing the plug from the socket and
wait for the appliance to cool down.
The Manufacturer declines any liability for any damage
or malfunctioning caused by incorrect or poor
maintenance.
Do not use direct water jets.
In case of anomalies, immediately turn off the
appliance, disconnect it from the power supply by
removing the plug from the socket and contact the
nearest service centre.
10.1 General notes for correct
operation
Non-removable components and the machine itself must
be cleaned, when not differently specified, only by using
cold or lukewarm water, with a non-abrasive sponge and a
damp cloth.
Never use direct water jets. Wring the damp cloth or the
sponge before using it to clean the appliance.
All the parts requiring cleaning are easily accessible, so no
tools are needed.
Periodic maintenance and cleaning will keep the machine in
good working conditions for a longer time and ensure
compliance with basic hygiene standards.
To guarantee the correct operation of the machine it is
recommended to conform to the instructions and times
indicated in the "MAINTENANCE SCHEDULE".
74
10.2 Cleaning and scheduled
maintenance
All components must be rinsed with warm water only,
without using any detergent or solvent that could
modify their form and operation.
Removable components cannot be rinsed in the
dishwasher.