Saeco NEXTAGE CAP010 Use And Maintenance page 22

English
Open the door and switch on the machine by means of
the power button.
Close the door.
The following screen is displayed on the control panel.
Wait for a few seconds without touching the control
panel.
When the switch-on phase is complete, the following beverage
selection screen is displayed on the control panel.
No beverage will be brewed and no icon will be
enabled until the boilers reach the operating
temperature.
66
At the end of the warm-up phase the machine carries out
the "Machine ready" cycle.
At this point the icons of the beverages will be enabled.