Selecting A Location On The Map - Jensen VX7020A Operating Instructions Manual

5. Check the settings for road types and change them if necessary.
Tap to enable or avoid freeways, tap
for ferries, or tap
6. Tap
or tap to select a different destination.
7. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap

3.1.8 Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
for carpool lanes.
to confirm the destination. You can also select a nearby point on the map
to start your journey.
for roads with Period Charge or Per-use Toll, tap
to modify the route parameters, or tap
48