Selecting A Saved Location - Jensen VX7020A Operating Instructions Manual

3.1.4 Selecting a Saved Location

To select a location that you have already saved (page 59), perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap and
3. The list of saved locations is displayed. It contains two pre-set categories: Home and Work.
4. Tap the location that you want to set as your destination. If necessary, browse the list to see more
results.
5. (optional) If needed, tap
locations or delete any of them.
6. After you have selected a saved location as the destination, a full screen map appears with the
selected point in the middle.
7. If necessary, tap the map somewhere else to modify the destination. The cursor (
the new location.
8. Check the settings for road types and change them if necessary.
Tap to enable or avoid freeways, tap
for ferries, or tap
9. Tap
or tap to select a different destination.
.
to enable the editing option so that you can rename the saved
for carpool lanes.
to confirm the destination. You can also select a nearby point on the map
43
for roads with Period Charge or Per-use Toll, tap
) appears in