Using The Buttons And Other Controls; Using The Cursor - Jensen VX7020A Operating Instructions Manual

2.2.1 Using the buttons and other controls

To operate, tap the buttons on the touch screen.
The Navigation menu may contain several menu items on one or more pages. To open the other pages,
tap the arrows on the side of the screen.
The Navigation menu may contain several menu items on one or more pages. To access the other menu
items, grab the list anywhere and slide your finger up or down.
You need to confirm selections or changes only if the application needs to be restarted, if it needs to
perform a major reconfiguration, or if you are about to lose some of your data or settings. Otherwise,
the VX7020A saves your selections and applies the new settings without confirmation as soon as you
use the controls.

2.2.2 Using the cursor

You can select a map location in the following ways:
•
By tapping the map when navigating
•
By tapping the map when you are asked to confirm the destination at the end of a search.
When a map location is selected, the cursor (
The location of the cursor can be used as the destination of the route or a new Alert Point. You can also
search for Places around it or add this location to your saved locations.
You can also select some of the objects on the map. If you tap the map at the icon of a Place or traffic
event, the object is selected, and you can get information about this object or use it as a route point.
) appears at the selected point on the map.
8