Ipod Operation; Accessing Ipod Mode; Selecting A Playlist - Jensen JRV212T Installation And Operation Manual

JRV212T

iPod OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if
compatible) using the control panel control buttons. The following iPod versions are supported:
• iPod Nano (1G, 2G, 3G, 4G, 5G and 6G)
• iPod 5G
• iPod Classic
• iPhone, iPhone 3G, iPhone 3GS, 4G
• iPod Touch 1G, 2G, 3G and 4G
• iPod Touch 2G
NOTE: iPod and iPod Cable sold separately.

Accessing iPod Mode

If iPod Auto-Select is turned "On" in the system menu, your
iPod will play automatically when connected to the unit.
"iPod" will appear in the upper left corner of the display.
If iPod Auto-Select is "Off" in the system menu, your iPod
will not play automatically when connected. In this case,
touch the on-screen "iPOD" button to change to IPOD
mode. If you do not see the "iPOD" button, press the
AUDIO button (4) to view the audio playback screen.
Turning the iPod On/Off
The iPod power turns on automatically when an iPod is
connected to 30-pin iPod cable, as long as the vehicle ignition is turned on. You can turn the iPod off
by disconnecting it from the cable or by turning the ignition off. When the ignition is turned off, the
iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power
cannot be turned on or off from the iPod itself (does not apply to iPhone).
NOTE: The iPod will continuously recharge when connected to the unit, as long as the
vehicle ignition is turned on.

Selecting a Playlist

1. When an iPod is playing, touch the "DIR" button to display the playlists on the LCD.
2. Use the onscreen up/down (left/right) arrows to change the playlist between Artist / Album /
Genre / Song / Audiobook / Podcast.
3. Press the up/down arrows to navigate the selected playlist.
4. Touch to select a file to play.
Jensen iPod Ready Cable
HEAD UNIT
iPod
iPod iPod iPod iPod
Video photo mini nano
Optional iPod Adaptor
19
Controlling Playback
3/275
RPT
Cake
SHUF
Long Time
INTRO
Showroom of Comp
DIR
Selecting Songs
• Touch the or button to go to the next or previous file. The selected file number will
appear on the information bar at the top of the screen.
• Touch and hold the or button to fast forward or fast reverse.
• Release to resume normal playback.
Pause Playback (MUTE)
• Press the MUTE button (6) to suspend playback. Playback controls are disabled when paused.
• Press the MUTE button again to resume playback.
Repeat Play
• Touch the "RPT" button during to repeat play the current file.
• Touch "RPT" again to stop repeat play.
Shuffle Play
• Touch the "SHUF" button on the touch screen to play all files in random, shuffled order.
• Touch "SHUF" again for normal play.
Intro Play
• Touch the "INTRO" button to play an introduction of each file, beginning with the next file. The
unit will play the first 10 seconds of each track.
• Touch "INTRO" again to stop intro play and play the current file in full.
10:33 PM
2:43
AM/FM WB
SAT CD
iPOD
USB
F.AUX R.AUX