setup screen
To configure the detailed settings for the preset
1. Select the number of preset that you
want to configure.
• After action : <after action> sets
whether to perform a video analysis
after the preset is operating.
- Video analysis : MD/VA operation is
run.
• Camera setup : You can change the
camera setting to the environment of
the selected preset.
Refer to "camera setup" for how to
set the camera. (page 68)
• MD / VA : You can set the system to generate an event signal when a movement
is detected in the preset, or an intelligent video analysis event is detected.
For more details, refer to "mD / va". (Page 100)
2. When done, click [apply (
After saving the preset setting, make sure to select <Sequence Setup> or run the preset. If
`
J
the operation is not performed, the system may run a wrong operation, such as an unintended
change of preset setting.
While setting preset edit, you cannot use the functions, such as preset setting, home position
`
setting and move to the home position.
62_ setup screen
)].