Connecting With Other Device; Ethernet Connection; Power Supply - Samsung SNZ-6320 User Manual

installation & connection

connectinG witH otHer Device

The BNC Out terminal of the product is provided for easier installation, and is not recommended
`
J
for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to
the product.

ethernet connection

Connect the Ethernet cable to the local network or to the Internet.

power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
Be careful not to reverse the polarity when you connect the power cable.
`
J
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If PoE and DC 12V are both applied, this camera will get supplied with power from PoE.
`
Please make sure the monitor and camera are turned off when connecting them.
`
18_ installation & connection
FOCUS
AUDIO OUT AUDIO IN
RESET VIDEO
SD POWER
ALARM IN 1
ALARM OUT 2
ALARM COM 3
NETWORK
GND 4
ACT LINK
RS-485+ 5
DC 12V
RS-485 - 6
Ethernet
Power
Monitor