Samsung SNZ-6320 User Manual page 15

Item
SD, Power Indicators
e
Power Port
f
Network Port
g
I/O Port
h
RS-485 port only supports direct connection with pan/tilt driver and external connections of the
`
J
RS-485 controller is not supported.
ON : A memory card is inserted and operates normally.
Flashing : Failed to record, insufficient space, or inserted
SD abnormally.
OFF : Camera is off, camera is restarting, or memory card is
not in place.
ON : While the power is on
POWER
OFF : If the power is off
Used to plug the power cable.
Used to connect a PoE or LAN cable.
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND Used for earth-grounding.
RS-485+ RS-485 Data line
RS-485- RS-485 Data line
Description
English _15