Alarm Input - Samsung SNZ-6320 User Manual

setup screen

alarm input

You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the
<event (
2. Click <alarm input>.
3. Set whether or not to <enable>.
4. Select the type.
• Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
• Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
5. Specify the <activation time>.
• Always : Always check if an alarm
occurs. It activates in operated mode when the alarm occurs.
If set to <Always>, the activation time cannot be changed.
`
• Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
• [Clear (
• Minute : Click an area in Activation
Time and set the time by minutes.
• Hour : Drag your mouse at Activation
Time and set the time by hours.
The transfer interval setting value must be
J `
smaller than the preset activation interval
to succeed in image transmission.
96_ setup screen
)> tab.
)] : Reset all settings.