12
SERVICE WORK ON THE CHASSIS
12.43
Checking the swingarm
12.44
Checking the routing of the throttle cable
12.45
Checking the rubber grip
x
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
401520-01
Preparatory work
–
Remove the seat. (
–
Remove the fuel tank.
Main work
–
Check the routing of the throttle cable.
Both throttle cables must be routed to the throttle valve body side by side behind
the handlebars and above the fuel tank bearing.
»
If the throttle cable is not routed as specified:
–
Correct the routing of the throttle cable.
C00602-10
Finishing work
–
Install the fuel tank.
–
Mount the seat. (
–
Check the rubber grips on the handlebar for damage, wear, and looseness.
»
If a rubber grip is damaged, worn, or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
401197-01
x
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by Husqvarna.
p. 49)
(
p. 56)
x
(
p. 57)
x
p. 49)
p. 110)
62