Napoleon Hybrid HMF200 Installation And Operating Instruction page 38

38
NoTE
Connection of solid fuel and oil fired appliances to a common chimney, see Section 5.1.4 of CSA B139-
EN
09 and Section 5.2.7 of Can/CSa b365-01 for conditions allowing a single chimney for wood and oil.
Common chimney must be approved for use with woodburning appliances (2100°f) (1149°C).
LEFT HAND RA CONFIGURATION (REAR VIEW)
18" (457mm)
14"
(356mm)
24"
(610mm)
vENTINg FRoM oIL FLUE ALWAyS INCLINES To ThE SAME SIdE oF ThE FURNACE ThAT ThE
RIGHT HAND RA CONFIGURATION (REAR VIEW)
WOOD, WOOD/OIL FLUE
(229mm)
24"
(610mm)
W415-1013 / B / 07.24.13
STRICTLy AdhERE To ALL IdENTIFIEd INSTALLATIoN CLEARANCES.
ventIng cleaRance tO cOMBustIBles anD seRvIce cleaRances
WOOD, WOOD/OIL FLUE
18" (457mm)
MAX 16" (406mm)
9"
(229mm)
14"
(356mm)
BlOWeR MODule Is MOunteD On.
18" (457mm)
MAX 16" (406mm)
9"
14"
(356mm)
(356mm)
*Drawing not to scale
LEFT HAND RA CONFIGURATION (SIDE VIEW BLOWER MODULE)
18"
(457mm)
9"
(229mm)
24"
(610mm)
1.25"
24"
(32mm)
(610mm)
CLEARANCE TO COMBUSTIBLES
*Drawing not to scale
RIGHT HAND RA CONFIGURATION (SIDE VIEW BLOWER MODULE)
14"
48"
(1219mm)
24"
(610mm)
NoTE: incline of oil exhaust allows access to fresh
air inlet.
h3.55
WOOD, WOOD/OIL FLUE
48" (1219mm)
h3.56
(457mm)
WOOD, WOOD/OIL FLUE
9"
(229mm)
24"
(610mm)
1.25"
(32mm)
CLEARANCE TO COMBUSTIBLES
*Drawing not to scale
18"
*Drawing not to scale