3
Hardware Installation
Before using the Network Video Recorder, please prepare SATA hard disk(s) for recording
video.
1. Make sure the power is off.
2. Secure the supplied rack mount ears if you want to use rack mount installation.
3. Loose the lock of the hard disk as shown below and take out the bracket.
4. Put your hard disk into the bracket, and secure it with the supplied four screws.
5. Loose the lock of the hard disk as shown below and insert your hard disk(s) into the
socket.
6. Use the supplied key to lock the hard disk socket(s) for security concern.
2
3
5
4
6
EN - 5