Assigning An Ip Address - Vivotek NR8201 Quick Installation Manual

5

Assigning an IP Address

1. Set up the Network Video Recorder in LAN. When in LAN, the default IP address for the
Network Video Recorder is 192.168.100.1. Directly enter the IP address in the addrees
bar of the web browser. The webpage of the Network Video Recorder will be displayed
for you to confi gure the settings.
2. If you want to access over the Internet, please assign a WAN IP address in the
confi guration page. There are three ways to get WAN IP address: DHCP (Dynamic IP),
Static IP address, and PPPoE (DSL).
If your network environment is DHCP, you can use VIVOTEK Installation Wizard 2 (IW2)
to get an IP address easily.
(1) Install "Installation Wizard 2" from the Software Utility directory on the software CD.
(2) The program will conduct an analysis of your network environment. After your net-
work is analyzed, please click on the "Next" button to continue the program.
Installation
Wizard 2
(3) The program will search the VIVOTEK Network Devices on the same LAN.
(4) After searching, the main installer window will pop up. Click on the MAC that match-
es the one labeled on the bottom of your device to connect to the Network Video
Recorder via Internet Explorer.
NR8301
0002D107893F
3. Use the WAN IP address to access the Network Video Recorder from the Internet.
00-02-D1-07-89-3F
0002D107893F
EN - 7
192.168.5.131 NR8301