Honeywell Domonial User Manual page 17

How to control your system over the phone ?
⑦
Control of your system over the phone is only possible from a multi-frequency phone
(tone dialling) or from your cellular phone. This function must be configured by the
i n s t a l l e r.
Remote control is authorised only after you have entered a valid code.
The Domonial control panel picks up your call after the number of rings configured
by the installer or after it has been called twice successively.
ACCESS TO YOUR SECURITY SYSTEM
●
REMOTE ARMING
Over a phone you can arm a set if it has no final door set up.
• Dial the phone number of your
security system.
• A 2-second beep sounds followed
by the "Arpeggio" invitation tune.
• You then have 30 seconds to enter
your secret code.
• A high-pitch beep confirms that the
code is valid. You are then connected
to your security system.
• Press keys
for total set arming.
• Press keys
for part set arming
17