How To Use The Keyfob - Honeywell Domonial User Manual

⑤
The keyfob can be used to arm or disarm your security system to trigger an
audible or silent alert as well as control electrical equipment remotely**
●
ARMING***
✔ Press key :
✔ The indicator light on the keyfob comes on briefly when you release
the button
- The arming tone
is emitted by the panel siren.
Always make sure that your arming request is followed by tone.
If, upon arming, a door or window contact is in the "open" position (e.g. window not properly
shut), a FA U LT signal will inform you. Disarm the system, shut the corresponding window
and repeat arming.
●
PART SET ARMING***
Provided that this function has been programmed by the installer, you can choose to protect
only a part of your premises whilst you are in the other part. For instance, you can protect the
ground floor while you are sleeping upstairs.
✔ Press key
✔ The indicator light on the keyfob comes on when you release the button.
- The part set arming tone
is emitted by the signaling equipment.
* The system may include 0 to 10 keyfobs of this type.
** This function re q u i res an optional X10 extension with X10 modules.

How to use the keyfob*

14