Rhythm Mode Parameters; Rhythm Id; Volume - Kurzweil MPS20 User Manual

Rhythm Mode Parameters

The available parameters in Rhythm Mode are: Rhythm ID and Volume. Press the
[Select] or
{

Rhythm ID

The default parameter is Rhythm ID. Pressing the [Select Jump] button pair ([Select]
buttons simultaneously) defaults to this parameter.
The [Value Jump] button pair (pressing the [Prev]
advances to the first rhythm of the current category. If you continue to press the [Value Jump]
button, you can advance to the first rhythm in each category.
back to the first category.
EMPTY
U1, and

Volume

Use the Rhythm Mode volume parameter to change the volume of the rhythm pattern for
playback or recording. The volume range is from 1 (minimum) to 9 (maximum). The default
volume setting is 9 (maximum).
In Rhythm Mode, press the [Select]
the current volume setting). Press the [Prev]
volume.
To reset the volume to the default setting, press the [Value Jump] button pair (simultaneously
press the [Prev]
button to select a Rhythm Mode parameter.
If there are no user recorded songs, the display scrolls the song ID,
.
or
NOTE: Changing the volume affects all rhythm patterns,
even Favorites.
and [Next] buttons).
and [Next] buttons simultaneously)
This cycles through and wraps
VOL:X
button. The display scrolls
and [Next] button to increase or lower the
and
(X represents
37
Rhythm Mode