Chapter 10 Recording; Recording A Song; Preparing To Record; Recording Track 1 - Kurzweil MPS20 User Manual

Recording
Chapter 10

Recording a Song

The MPS20 has a two track recorder. You can record two voice tracks and a rhythm pattern
accompaniment. Favorites can be used to give you even more versatility while recording. For
example, you can have a Favorite split voice such as Piano and Bass recorded in Track 1 and a
layered favorite in Track 2.

Preparing to Record

If you want to have a rhythm pattern play while recording, select the [Function] button to enter
Function Mode. Press the [Select]
default setting for the
change the value to
You can leave this parameter set to
number 351. Select this rhythm pattern and no rhythm will play.

Recording Track 1

Select the voice you want to use for Track 1. To record a song with a rhythm pattern, press the
[Rhythm] button and select a pattern for your recording.
Press the [Record] button. Its LED lights and the display scrolls
button's LED should also be lit.
To begin recording, press the [Play/Stop] button and start playing.
38
Recording
or
REC RHYTHM
parameter is
ON
.
ON
. There is a "no rhythm" pattern available, rhythm ID
NOTE: The default setting for the metronome is also
the instructions described above to enter Function Mode, but
METRO:off
select the parameter and change its setting to
metro:rEC
. This will allow the metronome to play during
recording.
NOTE: If you are using the metronome, it will count off one
measure before recording begins.
buttons to step through the list of parameters. The
OFF
, press the [Prev]
OFF
RECORD READY
or [Next] button to
. Follow
. The [Track 1]