Chapter 10 Metronome(Rhythm)/Transpose Mode - Kurzweil MP120A User Manual

Chapter10
Starting Metronome(Rhythm)
Auto Layer
Press the [Metro/Rhy] button for 2-3
seconds, then select a rhythm by using the
[Next] or [Previous] button.
Transpose
This button will allow you to adjust the tuning of the keyboard in semitones, to a desired
interval.
Metronome/Transpose
Press the [Metro/Rhy] button for 2-3 seconds.
At this moment, you can choose one of 6 metronomes
and 20 rhythms by using the [Next] or [Previous] button.
To stop the metronome, press the [Metro/Rhy] button
again. Please see the types of metronome and rhythm
list below :
■
While playing a rhythm : The left/middle pedal can be used
for Fill-In and Intro/Outro respectively.
■
Fill-in : If you press the middle pedal, when a rhythm is
started, a different rhythm pattern will be played after
one-measure interlude.
■
Intro/Outro : If you press the left pedal, the [Metro/Rhy]
button will blink, then the Intro will begin with a rhythm.
While playing, if you press the left pedal, the rhythm will stop.
Rhythm List
No Rhythm
1 Dance
2 Light Rock
3
4 Pop Polka
5 Hard Rock
6 Country
7 Rhumba
8
9 16Beat
10 Ballade
By using the [X-Pose +] or [X-Pose +] button, you can
transpose down or up by one semitone (100 cents).
When transpose value goes up, the LED on the [X-Pose +]
button will be lit. When transpose value goes down,
the LED on the [X-Pose -] button will be lit.
Transpose Value Range: -24 ~ 0 ~ +24
The value more or less than the adjustable range cannot
be done.
No
11
12
Pop 13
14
15
16
17
8Beat 18
19
20
Metronome/Transpose
Rhythm
Bosanova
Samba
March
Waltz
ChaCha
Reggae
Jazz
Rhythm Beat
Swing Rock
Fox Trot
21