Saving Split Voices; Save Button; Favorite Button; Changing Split Voices - Kurzweil MPS20 User Manual

Saving Split Voices

There are two ways you can save a split voice along with your changes. Both are quickly
executed with just a couple of button presses. The first way is to select the [Save] button and
enter the Save Dialog, the second is using a [Favorites] button. A description of each method
follows.

Save button

When you enter the Save dialog, the display shows the location of the first empty favorite
location. You can use the [Prev]
alternates between the first empty favorite location and [Favorite 1]. Continuously pressing the
[Prev] or [Next]
To save your split voice, press the [Save] button. Its LED is flashing and the display scrolls
SAVE VOICE AS FX
Press the [Save] button again to save the split voice. The split voice is now saved and the
MPS20 exits the Save Dialog and returns to Voice Mode.

Favorite button

This method is an even quicker way to save a split voice. Select a [Favorites] button to store
the split voice. Then press and hold the button at least 1.5 seconds. The split voice is now stored
in that location. At this point, the MPS20 is in Voice Mode, the just saved split voice is active, and
its ID number shows in the display.

Changing Split Voices

If you have saved a split voice as a favorite and want to make a change, select the favorite.
Press the [Split] button to enter Split Mode.
The primary voice remains the same and the secondary voice is the default voice. You can
select another voice to use as the secondary voice, make changes, and save the newly split
voice just as you did when you created and saved the original.
or [Next]
button cycles through all six favorite locations.
. (X represents the favorites location.)
NOTE: If you don't save the current changes and you exit Split
Mode, the MPS20 remembers the last split voice. Just press the
[Split] button again and your changes should still be available to
save. Be sure to save your changes before you turn off the
MPS20 or they will be lost.
button to change the location. [Value Jump]
31
Splitting