Figure 2
GXT2-6000RTL630, rear view
Battery
Disconnect
External Battery
Connector
UPS Output
Circuit Breaker
DB-9
Communication
Port
Removable Power
Distribution Box
Maintenance
Bypass Switch
3.2
Internal Battery Packs
The UPS has two internal battery packs behind a battery access door on the front of the unit. Each
pack is fitted with a connector to link to the UPS. The batteries are shipped in packaging separate
from the UPS. These must be installed before the UPS may be put into service. For installation
instructions, see 5.2 - Install the Internal Batteries.
8
Major Components
Fans
REPO Connector
Relay Card Slot
Serial Card Slot
(SNMP, OCWEB, USB)