Tunturi GO Bike R 30 User Manual page 19

CAUTION
– Keep the console away from direct sunlight.
– Dry the surface of the console when it is covered with drops of
sweat.
– Do not lean on the console.
– Only touch the display with the tip of your finger. Make sure that
your nails or sharp objects do not touch the display.
NOTE
– The console switches to standby mode when the equipment is not
used for 4 minutes. If the console is in standby mode, the display
shows the room temperature.
Explanation of buttons
Button
ENTER / ROTARY DIAL
RECOVERY
RESET
BIKE R 30
Explanation
Press the dial to confirm your selection.
Press the button to calculate your recovery heart rate
after a workout.
Press the button to return to the menu. Press and hold
the button to reset the meter.
EN
19