Table of Contents
Advertisement
Fault display
Fault displaying logic
When a fault occurs, the corresponding warning light (if present)
comes on on the panel whereas a description of the fault (if
available) and the relevant symbol (if available) are displayed on
the left TFT display. The message appears on the display at the
same time as the warning light (if present) comes on and the main
screen page that is displayed at that moment is minimised.
The fault remains on the display for 20 seconds. When the display
cycle ends, if the fault does not have a special warning light on the
panel, the symbol remains minimised in area
page 97) until the cause of malfunctioning has been resolved. In
area
the main screen page is displayed in "maximum" size.
B
When the display cycle ends, if the fault has a special warning
light on the panel, the screen page that was displayed prior to the
event reappears and the symbol is not minimised in area D. The
warning light remains on until the cause of malfunctioning has
been resolved.
Catalysts temp.
too high
Engine
performance
limited
If the fault is resolved within 20 seconds, it remains displayed and
the warning light remains lit for 2 seconds.
"ESCAPE" function
Displaying a fault on the screen can be interrupted by pressing and
quickly releasing the OK button with "ESCAPE" function. When
the OK button is pressed, the screen page that was displayed prior
to the event reappears. If the fault does not have a special warning
light on the panel, the symbol remains minimised in area
the cause of malfunctioning has been resolved.
D
of the display (see
D
until
About your Vehicle
4
113
Advertisement
Table of Contents
